Machine: |
One-Used FOREST LINE VECOMILL 463 CNC PLANO MILLING
MACHINE WITH FANUC 19i MB CONTROL SYSTEM
100 STATION ATC, TWIN PALLET SYSTEM |
Details: |
Serial No. 8074. (1989/90) New Control Retro-fitted in 2006.
| Pallet Size, (2) |
2500 x 2600mm |
| Maximum Pallet Load |
10.7 Tons |
| Maximum Distance between Columns |
3000mm |
| Maximum height under Spindle, (Z &W Axis fully Retracted) to Pallet Top |
2500mm |
| Table Stroke, X-Axis |
4500mm |
| Transverse Travel of Spindle Head, Y-Axis |
3580mm |
| Vertical travel of Crossrail, Z-Axis |
1000mm |
| Vertical Ram Stroke, W-Axis |
1800mm |
| Spindle Taper |
BT 50 |
Spindle Speeds, Infinitely Variable in 3 Ranges |
10-2500 rpm |
| Feed Rates, Infinitely Variable, X-Axis, mm/min |
3000-10160 |
| Y-Axis, mm/min |
3000-6000 |
| Z-Axis, mm/min |
3000-6000 |
| Spindle Front bearing Diameter |
145mm |
| Automatic Tool Changer |
100 Stations |
| Maximum Tool Diameter in ATC, full Storage |
110mm |
| Maximum Tool Length, in any Position |
500mm |
| In One Chain Magazine |
675mm |
| Maximum Cutter Diameter, Partial Storage |
315mm |
| Maximum Tool Weight |
40 Kgs |
| Tool change Time, Only |
8 Seconds |
| Main Drive Motor |
84 HP |
| Ram Spindle Motors |
60 HP |
Complete With; 2-Tee Slotted Pallets with Park Station
Automatic Indexing & Clamping of
Spindle Attachments.
Built-In Automatic Attachment Changer
and Indexing.
Increased Z-Axis Travel, 2500mm Height
under Spindle.
60 HP Horizontal Head Attachment
1-230mm Rotating Boring Attachment
1-127mm Rotating Boring Attachment
Automatic Indexing of Horizontal Spindle to
144 x 2.5 Degree position.
2-Swarf Conveyors
Through Spindle Coolant
Electrics; 380v, 3ph, 60cycles.
N.B
The above information has been obtained to the best of our ability and where possible from manufacturers, it is given in good faith but its accuracy cannot be guaranteed, accordingly it does not form a representation or constitute a
contractual term. We advise you to check any vital details. |
